BLACK BOX INSTRUCTIONS - STD. CHARGER
EURO Battery Charger Model: 6100
A-C Series
DEFINITIONS:
“A-C” series chargers are new “switching” type devices which operate without the use of transformers. I.C.’s control and regulate current and voltage and automatically switch from the higher fast charge voltage to the lower float voltage when batteries are very close to being fully charged.
At the float voltage it is safe to leave the battery connected to the charger indefinitely, making charging pretty much fool-proof.
PLEASE FOLLOW THESES INSTRUCTIONS:
1) Do not expose
unit to rain or moisture - use indoors only. It is not waterproof. No charger is.
2) Do not remove
cover. There are no user serviceable parts inside. Sorry.
3) Refer service to
qualified service personnel. Thats me.
4) The plug must be
plugged into an outlet that has been properly installed and grounded in
accordance with all local and national codes and ordinances.
5) Do not attempt
to recharge non-rechargeable batteries. Charge only Sealed Lead Acid or Valve regulated,
lead-acid, non-automotive, maintenance free rechargeable batteries. Attempting
to charge other types of batteries may result in personal injury and battery
damage.
6) Connect or
disconnect the output connectors only when the unit is disconnected from AC
power or power is off. Simple do not do hot connections.
7) Ensure correct
polarity connection: positive (red) to positive, negative (black) to negative
as set on the Din plug and switch.
8) √ Do not leave chargers plugged in when
they are not connected to a battery. We have no control over the voltage or amperage coming into your home from spikes and brownouts originated by your
9) Never make
alterations to the charging unit provided. If it will not fit the outlet have a
proper outlet installed by a qualified electrician. Improper connection will
result in the risk of an electric shock or fire.
10) Make sure any
cords are located so that they will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
11) Do not operate
charger if it has received a sharp blow, been dropped, or otherwise damaged in
any way.
12) Re-charge
batteries in well ventilated areas to prevent build-up of explosive gases. Allow space around the charger and
adequate air circulation to reduce internal heat buildup.
• LED
INDICATORS • GREEN: Power On,
Float Charge • RED: Fast Charge
GENERAL DESCRIPTION
:
1) This unit is
designed to automatically switch into a single stage, float charge mode when
the battery is charged.
2) The operating temperature range for C-Series chargers is 32°F - 104°F (0°C
- 40°C).
3) The charger may be used with
input voltages of 110-240 VAC, 50 or 60Hz.
4) Plug the charger
into the power source before connecting the output leads to the battery.
5) The green LED light indicates that the
power is on.
After the battery
has been connected to the charger the red LED will light up and the green
LED will go off.
This indicates that the charger has gone into Fast Charge mode.
6) The green LED will light up again when
the charger has switched to Float voltage indicating
that the battery is
close to being fully charged.
Not enough info, call me and I'll be happy to discuss it with you.